5.9.1 Grinding of f‌ibre reinforced plastics2019-05-03T12:52:08+02:00

5.9.1 Grinding of f‌ibre reinforced plastics (FRPs)

Objective:

Grinding is a mechanical surface treatment method for removing the uppermost layers of the substrate and exposing the actual base substrate.

Suitability:

Grinding is in principle suitable for fibre reinforced plastics.

Procedure:

  • Prior to grinding the surface must always be thoroughly cleaned and degreased, to prevent “incorporation” of the contaminants into the surface and making them thereafter very difficult or impossible to remove.
  • Manually with an abrasive block or using grinding machines
  • Grain size from K 120 to 180 is best for adhesive bonding applications
  • After grinding remove all grinding dust, etc. from the surface (e. g. using a disposable, white cloth soaked with cleaning agent)

Points to heed:

  • Regularly change the abrasive paper
  • Ensure the substrates are cleaned beforehand
  • Ensure the surface has a uniform finish
  • When grinding using machines, it must be ensured that there is no melting of the surface due to excessive grinding speeds.
  • Remove all residues and dust from the surface after grinding
  • Fibres must not be damaged

Durch die Nutzung dieser Webseite erklären Sie sich mit der Verwendung von Cookies einverstanden. Detaillierte Informationen über den Einsatz von Cookies auf dieser Webseite erhalten Sie in unserer Datenschutzerklärung.